110ML

110ml standard bottle sampler unit incorporates de-aeration facility.

Suitable for mineral oil applications only.

250ML

250ml laboratory bottle sampler unit incorporates de-aeration facility.

Options suitable for both mineral oil and phosphate ester applications.

View of a 110ml bottle sampler unit

A simple selection of the correct switch will enable the user to choose between VACUUM and de-aeration or SAMPLE to carry out analysis of the bottle sample.

Air can be seen as contaminants

An example of the difference between an aerated sample and non aerated sample can be seen below.

CERTIFICATE OF CLEANLINESS

MP Filtri UK hereby confirms that the sample bottles provided, Part No: .P.02, have been cleaned in accordance with DIN/ISO 5884.

The degree of cleanliness has been verified to ISO 3722 with a NAS 1638 cleanliness certification of between Class 00 and Class 0.

CLEAN BOTTLES
[ From BFPA/P5 report on Sample Bottles Cleanliness]

It is essential that only sample bottles which have been cleaned and verified by the ISO 3722 standard are used. Modern hydraulic systems featuring highly effective filters have fluid cleanliness levels that approach that of the sample bottles themselves.

The use of uncleaned bottles can greatly increase the particle counts (see table below). Please note that sterilisation kills bacteria but does not remove particles. Perhaps of even greater concern is the variability in their levels; some may be reasonably clean and give a fair representation of the system's cleanliness, only to experience a sudden increase in contamination when unknowingly a dirty bottle is used. This apparent increase could instigate unnecessary corrective action.