REMOTE OPERATION

By RS 485 interface, please contact MP Filtri for full details.

ACCREDITATION

The LPA2 is CE marked and supplied with an EMS acceptance certificate.

MAXIMUM PROTECTION AGAINST ENVIRONMENTAL HAZARDS...

The LPA2 case has a special extrusion to take an environmentally sealed mounting panel providing protection against dust and moisture thus allowing safe operation in the field.

CARRY BAG ACCESSORY

A strong lightweight bag us available which allows the LPA2 + accessories to be carried easily on-site.

OPTIONAL SCREEN FILTER

Recommende for heavily contaminated systems.

BOTTLE SAMPLE KIT CONTENTS

Case
Bottle sampler unit
Power supply
Vacuum cap
Sampling hose 400mm
Pressure hose 1500mm

Samples bottles x 3
Disposable tubes x 50
Hand pump and hose x 10 metres
Waste bottle and hose x 2 metres
Printer paper rolls x 2
Test point adaptor

STANDARD SAMPLING KIT

Case
Pressure hose 1500mm
Power adaptor
Waste bottle and hose x 2 metres
Printer paper rolls x 2
Test point adaptor

FIELD SAMPLING KIT

Part No: SK1000

Comprising:

Hand pump
4 x 1.5m clean sampling hose
4 x 110ml Ultra-clean sampling bottles
(Cleanliness certified to NAS 1638 class 00)
Identification labels
Information forms
Packaged in a sturdy box.

Due to the nature of hydraulic fluid contamination it is critical that the following procedures are undertaken to limit the ingress of contaminants into the fluid sample. Approved sampling procedures are on the reverse of this document.

Cut length of tubing to size if required.
Insert tube into hand pump.
Remove sample bottle from protective sleeve.
Remove cap and retain.
Attach sample bottle to hand pump.
Place free end of hose into fluid source.
Draw the plunger back to decant fluid from source into sampling bottle.
When the sample bottle is full disconnect from hand pump and recap.
Annotate bottle label and fill in corresponding form with all relevant information.
Place bottle and the information form inside the protective sleeve for shipping.
Dispatch sample for analysis.

LPA2 / PML2 SPARES (part no)

Hose extension kit x 5 metres (SK0500)
Hose extension kit x 10 metres (SK0100)
Screen filter (SK0400)
Carry bag (CB001)
Software package (spare) (LPA-W-20)
Secondary calibration verification fluid (PCCF)
Certified clean (NAS 00)
    100ml glass bottles x 1 (P.02)
Certified clean (NAS 00)
    250ml glass bottles x 1 (P.03)
Waste bottle - 1 litre (SK0012)
Pressure hose - 1500mm (SK0016)
Waste hose for LPA - Series 20 (SK0014)
Waste hose for LPA - Series 30 (SK0014-S30)
Printer paper - box x 20 rolls (SK0018)
Thermal paper - box x 20 rolls (6.160)
Printer ribbon - box x 10 (SK0020)
Minimess fitting 1/8" BSP male port (SK0022)
Power adaptor - UK (SK0024)
Power adaptor - US (US0010)
Power adaptor - EU (EA0010)
LPA User Guide - single language (LPAB10)
Glass bottle 100ml x 53 (BS0053)
Glass bottle 100ml x 1 (BS0016)
Glass sample bottle 250ml x 1 (0.8.54)
Pressure hose 400mm (BS0014)
Disposable tubes for BS pack 50 (BS0018)
Replacement hand pump (BS0020)
BS hand pump and hose kit
    Items BS0020 and BS0022 (BS0024)
LPA-View User manual (6.124)
USB to serial port connector (SK0026)
Support Case - black (without contents)     (BS0040)

See ordering information

< select buttons for further information